Crocheted Baby Set No. 1251

Original Design by Alice Fowler, 10 1/2 East Pikes Peak Ave., Colorado Springs, Colo.

Materials:  Bear Brand Wonderized Babyfair or Bear Brand Pompadour---5 1-ounce balls.  Bone Crochet Hook No. 1.

Gauge:  Chain 10 = 1 inch

Abbreviations:

ch---chain

dc---double crochet

sl st---slip stitch

st---stitch

lp---loop

sk---skip

r st---roll stitch sp---space yo---yarn over
med---medallion pr---previous row

sc---single crochet

*  *   repeat instructions between asterisks

NOTE:  All sc rows are made from back of work in this pattern.

To make Roll Stitch:

Wrap yarn over hook the required number of times, according to instructions in pattern you are working, keeping yarn high on the hook to make the loops loose enough to draw hook through.  Insert hook in desired st, yo, draw lp through st, yo, draw through all except last lp on hook (draw out to 1/2, 3/4, or 1 inch, according to pattern used), yo, through 2.

This is not a difficult stitch and a little practice will prove it.  The beauty of the stitch will pay you for the practice. 

NOTE:  Roll stitch is always made from the front, or right side of work.

Sacque.  Row 1.  Ch 74.  Dc in 6th st from hook, (ch 1, sk 1, dc in next) 5 times (6 meshes made), ch 3, dc in same st as last dc (corner made), 6 meshes, corner, 11 meshes, corner, 6 meshes, corner, ch 1, turn.

Row 2.  Sc in each dc, sc under each ch 1, 3 sc under each ch 3 at corners, end sc under ch 4, sc in third st of ch 4, ch 4, turn.

Row 3.  7 meshes, corner, 8 meshes, corner, 13 meshes, etc., around, ch 1, turn.

Row 4.  Same as Row 2.

Row 5.  Sk 1, r st (wrap 8 times and draw out 1/2 inch) in next, ch 1, sk 1, r st in next, etc., with (r st, ch 1, r st, ch 1, r st) in center, sc of each corner, sk 1, dc in last st, ch 1, turn.

Rows 6 & 8.  Sc in dc, sc in each ch 1, sc in top of each r st, 5 sc in center r st of each corner, end sc in dc, ch 4, turn.

Row 7.  Same as Row 5

Row 9 & 11.  Meshes across, corners as for Rows 1 & 3, ch 1, turn.

Rows 10 & 12.  Same as Row 2.

Body.  Row 1.  Ch 4, sk 1, (r st, ch 3, r st) in next, (r st V made), * sk 2 r st V in next *, repeat * to * across, catching corners of yoke together as you go, end ch 1, dc in last st.  Fasten off.

Row 2.  Join yarn at left front in third st of ch 4, ch 4, r st in sp at base of ch 4, * r st V between next 2 V's *, repeat * to * across, ending r st under ch 1, ch 1, dc in dc.  Fasten off.

Row 3.  Join yarn again at left front, ch 4, sk 1 r st, * r st V between next 2 V's *, repeat * to * ending r st in last sp, ch 1, dc in dc.  Fasten off.

Repeat pattern until work measures 5 1/2 inches from yoke.  If you desire added fullness, change ch 3 in r st V to ch 4 for the last few rows.

Edge entire sacque as follows:  * Ch 3, r st in next st, sc in next, drawing r st to a curl *, repeat around.

Sleeve.  Row 1.  Fasten yarn at underarm joining, ch 4, * sk 2, r st V in next, ch 1 *, repeat * to * around, join to third st of ch 4.  Do not turn or fasten off for sleeve rows.

Row 2.  Ch 4, r st in sp before first V, * ch 1, r st V between next 2 V's, repeat * to * around, end r st under last sp, ch 1, join to third st of ch 4.

Row 3.  Ch 4, sk 1 r st, r st V in sp before next V, r st between each 2 V's around, end r st in V in sp before last r st, ch 1, join to third st of ch 4.

Repeat Rows 2 and 3 until sleeve is desired length.

Cuff.  Row 1.  Ch 1, turn, 2 sc in each ch 3 sp, 1 sc between V's, join, ch 4, turn.

Row 2.  Meshes around, ch 1, join to third st of ch 4.

Edge as for body.

Bonnet.  Row 1.  Ch 6, join in ring, ch 1, 20 sc in ring.  Join.  Ch 4, turn.

Row 2.  Dc in next sc, * ch 1, dc in next *, repeat * to * around, join to third st of ch 4, ch 1, turn (20 dc, counting ch 3)

Row 3.  Sc in each dc and in each ch 1 sp, join, ch 4, turn (40 sc)

Row 4.  * Sk 1, dc in next, ch 1 *, repeat * to * around, join to third st of ch 4, ch 1, turn.

Row 5.  Sc in each dc, 2 sc under each ch 1, join, ch 3, turn.

Row 6.  R st in base of ch 3, * ch 1, sk 1, r st in next *, repeat * to * around, ch 1, join to top of first r st, ch 1, turn (30 r sts).

Row 7.  Sc in each r st, 2 sc under each ch 1, join, ch 4, turn.

Row 8.  * Sk 1, dc in next, ch 1 *, repeat * to * around, join to third st of ch 4, ch 1, turn (45 dc).

Row 9.  Sc in each dc, sc under each ch 1, join, ch 4, turn.

Row 10.  Same as Row 6.  (45 r sts)

Row 11.  Same as Row 9.

Row 12.  * Sk 3, r st V in next *, repeat 18 times, sk 3, dc in next.  Fasten off.

Row 13.  Join yarn in third st of ch 4 at beginning of previous row.  Work as for Row 2 of body.

Row 14.  Same as Row 3 of body.

Repeat Rows 13 and 14 until bonnet measures 5 1/2 inches from center back.  Fasten off.

Join yarn in base of last dc of Row 11.  Work 2 sc in end of each row across lower left front, 3 sc in corner st, sc in sp before first r st, * sc between r st V's, 2 sc under ch 3 *, repeat * to * across front, make lower right front to match left, join to base of first ch 4, ch 4, turn.

Make 1 row same as Row 8 around entire bonnet (except dc, ch 3, dc) in corner sts, ch 1, turn.

Repeat Row 9 around and edge as for sacque.

Bootee.  Begin with sole:  Ch 20.

Row 1.  2 dc in 4th ch from hook, 1 dc in each of next 15, 5 dc in next, 1 dc in each of next 15, 2 dc in last, join to top of 3-ch.

Row 2.  Ch 3, 2 dc in each of next 3, 1 dc in each of next 13, 2 dc in each of next 7, 1 dc in each of next 13, 2 dc in each of next 3, 1 dc in same st as 3 ch, join.

Row 3.  Ch 3, (1 dc in next 2 dc in next) 3 times, 1 dc in each of next 14 (2 dc in next, 1 dc in next) 7 times, 1 dc in each of next 13, (2 dc in next, 1 dc in next) 3 times, 1 dc in same st as 3 ch, join.

Row 4.  Ch 4, * sk 1, dc around post of next dc, inserting hook from back, right to left, ch 1 *, repeat around, join to third st of ch 4, ch 1, turn.

Row 5.  Sc in each dc, and sc under each ch 1, join.  Ch 4.  Turn.

Row 6.  Same as pattern Row 5 of yoke, join, ch 1, turn.

Row 7.  Sc in each r st, and sc under each ch 1, join, ch 4, turn.

Row 8.  Mesh pattern as for yoke, join.  Fasten off.

Instep.  Count 28 sts from center back on left side of shoe, join yarn, ch 4, sk 1 st, dc in next, ch 1, etc., to complete 6 meshes, ch 1, turn, sc in each dc and each ch 1, ch 4, turn. 

Repeat these 2 rows 3 times and make 1 more row meshes.

Catch last lp on hook into 16th st from back on right side of shoe (Do not count ch 3 at center back.), and with instep piece toward you, sc it to right side of shoe, 2 sc at corner, sc across toe, inserting hook from right to left under each st, 2 sc at corner, sc along left side, ending in 16th st from center back.

Beading.  With toe of shoe toward you, ch 4, * sk 1 st, dc in next, ch 1 *, repeat * to * across instep and around shoe, join to third st of ch 4 (22 dc, counting ch 4), ch 1, turn.

Top.  Row 1.  Sc in each dc, sc under each ch 1, ch 3, turn.

Row 2.  R st V in base of ch, * sk 3, r st V in next *, join, ch 3.  Do not turn!

Rows 3 & 4.  R st V's in pattern.

Row 5.  Ch 1, turn 3 sc under each ch 3, sc between V's, join, ch 2, turn.

Edge as for other garments.

Insert ribbons for ties, and lace frills if desired.